3/31/2024 0 Comments Etrailer pinbox measurements![]() Note: if the breakaway switch wires are fed through the mounting hole, you might have to cut the wires to remove it. Step 3: Remove any attached items, such as the power cord, breakaway switch, exterior lights, etc. Note: due to the misalignment of the holes, some telescoping pin boxes might require a redrill of 1 or 2 mounting holes. The MORryde pin box should be using the same bolts as the factory-installed pin box. They should be on each side of the pin box assembly. Step 2: Note the location of the pin box bolts. Step 1: Measure the distance of the bottom of the factory-installed king-pin to the flat bottom of the ground. Make sure your towing vehicle is in park mode (or turned off), your fifth-wheel is secured from moving (use chock blocks and stabilize) and that no one is under the fifth-wheel in between the pin box and the ground. Do not attempt to do this alone, as you might risk injury,death or damage (or both) due to dropping the pin box. Note: this is, at minimum, a two-person job. This 1-minute company video explains the features best: The MORryde Rubber Pin Box has a dampener mechanism that reduces the back-and-forth and side-to-side chucking, making it for a smooth ride, no matter the terrain or road conditions. 90-degree turning radius in either direction without a slider hitch. ![]() Similar to Orbital Rotating Rubber Pin Box.Rated at trailer max gross weight of 16,000 lbs. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |